Patch-ID# 115302-01 Keywords: CP2060/CP2080 SPARC and SMC firmware update Synopsis: Hardware/PROM: CP2060/CP2080 SPARC and SMC firmware update Date: Jul/08/2003 Install Requirements: Additional instructions may be listed below Solaris Release: 8 SunOS Release: 5.8 Unbundled Product: Hardware/PROM Unbundled Release: SPARC 1.0.5 SMC 3.10.8 Xref: Topic: Relevant Architectures: sparc BugId's fixed with this patch: 4470722 4533255 4634196 4652182 4652581 4652583 4652847 4662568 4662671 4663938 4668372 4668453 4668545 4668552 4670754 Changes incorporated in this version: 4663938 4470722 4652182 4668545 4668552 4668372 4668453 4670754 4634196 4533255 4652581 4652583 4652847 4662568 4662671 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: CP2060_CP2080.Release_Notes CP2060_CP2080.smc.3.10.8.Flash CP2060_CP2080.sparc.1.0.5 CP2060_CP2080.sparc.1.0.5.Unix Problem Description: 4668372 Add 21555 chip support 4668453 ttyb as console in Sputnik hangs OS boot 4670754 RFE: Disable ipmi notification after OS halt 4634196 Sputink OBP battery less feature needs to save sys. conf. modified from Solaris 4533255 Boot time WARNING: invalid vector intr: number 0x7de, pil 0x0 (OBP fix) 4652581 Misleading message from OBP environment monitoring 4652583 RFE: Add Led access support and client services commands for OS 4652847 Add "ipmi-checksum-ctlr" field in printsmcenv and setsmcenv 4662568 netconsole behaves incorrectly. 4662671 Sparc + SMC combined firmware flash update must be supported at OBP level 4663938 obdiag system flash write/read/verify test fails and corrupts the flash. 4470722 OBP support for OEM configuration variable backup in system flash 4652182 Write FRU data IPMI command writes only one byte at a time. 4668545 The set and get configuration cmds for KCS interface & IPMI are not consistent 4668552 RFE: Have checking of incoming IPMI packet checksum, configurable. Patch Installation Instructions: -------------------------------- Refer to the special installation instructions described below. Special Install Instructions: ----------------------------- This patch has following files: CP2060_CP2080.Release_Notes - Firmware release notes CP2060_CP2080.sparc.1.0.5.Unix - OS level script for SPARC firmware update CP2060_CP2080.sparc.1.0.5 - SPARC firmware binary CP2060_CP2080.smc.3.10.8.Flash - SMC firmware binary Firmware update sequence: 1. Update SPARC firmware (OS level update method is highly recommended). 2. Update SMC firmware. Instructions for OS level SPARC firmware update script: o Copy "CP2060_CP2080.sparc.1.0.5.Unix" file to the local disk of the CP2060/CP2080 board. o Login as "root" and execute "CP2060_CP2080.sparc.1.0.5.Unix" script o After flash update is done, halt OS to drop to OBP "ok" prompt. Power cycle the CP2060/CP2080 board. Instructions for OBP level SPARC firmware update: o Update the system flash using "flash-update" command from OBP "ok" prompt: ok flash-update /CP2060_CP2080.sparc.1.0.5 o Power cycle the CP2060/CP2080 board. Instructions for OBP level SMC firmware update: o Update the SMC firmware using "smc-flash-update" command from OBP "ok" prompt: ok smc-flash-update /CP2060_CP2080.smc.3.10.8.Flash README -- Last modified date: Tuesday, July 8, 2003