Patch-ID# 114176-05 Keywords: oracle udlm 64-bit shutdown Synopsis: Sun Cluster 3.0: OPS Core Patch for Solaris 9 Date: Feb/10/2004 Install Requirements: Install in Single User Mode Reboot after installation Solaris Release: 9 SunOS Release: 5.9 Unbundled Product: Sun Cluster Unbundled Release: 3.0 Xref: This patch available for Solaris 8 as patch 111857 Topic: Sun Cluster 3.0: OPS Core Patch for Solaris 9 Relevant Architectures: sparc BugId's fixed with this patch: 4687179 4741134 4788059 4812660 4923106 4957155 Changes incorporated in this version: 4957155 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /etc/init.d/initucmm /etc/rc3.d/S30initucmm /opt/SUNWudlm/bin/udlmreconfig /opt/SUNWudlm/lib/libudlmlib.so.1 /opt/SUNWudlm/lib/sparcv9/libudlmlib.so.1 /usr/cluster/lib/libhaops.so.1 /usr/cluster/lib/sparcv9/libhaops.so.1 /usr/cluster/lib/ucmm/reconf.d/rc2.d/05_udlm /usr/cluster/lib/ucmm/reconf.d/rc3.d/05_udlm /usr/cluster/lib/ucmm/rpc.ucmmstate /usr/cluster/lib/ucmm/ucmm_reconf /usr/cluster/lib/ucmm/ucmmd Problem Description: 4957155 previous patch 114176-04 will not install due to incorrect package version number (from 114176-04) 4923106 cm_reconfigure() timed out when second OPS cluster node was shutdown (from 114176-03) 4812660 HA-OPS patches should not require simultaneous shutdown of all nodes (from 114176-02) 4788059 ucmmd should block ucmm_reconfigure request during step1 to prevent ret loop (from 114176-01) 4687179 [SUNWudlm.udlm]: lib initialization failed after node3 removed from cluster 4741134 first node down caused the second node 'lkcm_dreg failed to communicate to CMM' Patch Installation Instructions: -------------------------------- There are three (3) possible procedures for installing patches on Sun Cluster 3.0. The proper method to use and any additional instructions, for this patch are specified below in the "Special Install Instructions" section. Refer to the chapter entitled "Patching Sun Cluster Software and Firmware" in the Sun Cluster 3.0 System Administration Guide for a description of the different install processes and instructions on how to install Sun Cluster 3.0 patches. For Solaris 9 release, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Special Install Instructions: ----------------------------- Install this patch using the patch install procedure for a "Rebooting Patch (node)" as described in the "Patching Sun Cluster Software and Firmware" of chapter the Sun Cluster 3.0 System Administration Guide. It is recommended that whenever the procedure says to reboot into single-user mode, that you boot into non-clustered single-user mode, by using the boot flags "-sx" rather than "-s". This patch must be installed while the node is not currently a member of the cluster. README -- Last modified date: Tuesday, February 10, 2004