Patch-ID# 112080-07
Keywords: Sun Fire 15K SMS
Synopsis: SMS 1.1: Patch IBIST for pause wafer change.
Date: May/21/2002

Solaris Release: 8

SunOS Release: 5.8

Unbundled Product: System Management Services

Unbundled Release: 1.1

Xref: 

Topic: SMS 1.1: Patch IBIST for pause wafer change.

Relevant Architectures: sparc

BugId's fixed with this patch: 4497133 4497327 4499882 4504181 4505473 4505886 4505932 4508629 4510935 4519061 4521997 4533839 4672398

Changes incorporated in this version: 4672398

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/opt/SUNWSMS/SMS1.1/bin/hpost
/opt/SUNWSMS/SMS1.1/bin/redx
/opt/SUNWSMS/SMS1.1/lib/libxcpost.so

Problem Description:

4672398 Need some .postrc commands externalized.
 
(from 112080-06)
 
4533839 Write/read-compare on Ethernet hub fails intermittently
 
(from 112080-05)
 
4499882 Bogus WARNING messages during hpost stage cpu_probe
4505473 when 2 domains share an expander, hpost -Q on one causes the other to DStop
4505886 Intermittent E$ probe failures
4519061 New API needed to control SDC error masks.
4521997 Need to accept Schizo 2.3
 
(from 112080-04)
 
4508629 Trap in exp_lpost leads to infinite loop
4510935 CDC DIMM failures first time after power-up
 
(from 112080-03)
 
4497327 DX-SDI IBIST fails on DStopped split expander
4504181 esmd gets console bus error during hpost stage asic_config
 
(from 112080-02)
 
4505932 CPU unconfigure operation using split-slot domain can cause DStop
 
(from 112080-01)
 
4497133 Patch IBIST for pause wafer change.

Patch Installation Instructions:
--------------------------------
For Solaris 2.0-2.6 releases, refer to the Install.info file and/or
the README within the patch for instructions on using the generic
'installpatch' and 'backoutpatch' scripts provided with each patch.
 
For Solaris 7-8 releases, refer to the man pages for instructions
on using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
        example# patchadd /var/spool/patch/104945-02
 
The following example removes a patch from a standalone system:
 
        example# patchrm 104945-02
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
-----------------------------
 
Follow these steps when installing on the SC:
1. Record which SC is the main SC.
2. Stop the SMS processes on both SC's simultaneously.
        /etc/init.d/sms stop
3. Install the patch on both SC's.
4. Start the SMS processes on the previous main SC first.
        /etc/init.d/sms start
5. After all the sms processes have started (i.e. you're able to run the
   showenvironment command and get all the system's status),
   start the SMS processes on the Spare SC next.
        /etc/init.d/sms start

README -- Last modified date:  Tuesday, May 21, 2002