Patch-ID# 111952-03 Keywords: netra x1 Synopsis: Hardware/PROM: Netra X1 / Sun Fire V100 PROM upgrade patch Date: May/20/2003 Install Requirements: Additional instructions may be listed below Solaris Release: 8 9 SunOS Release: 5.8 5.9 Unbundled Product: Netra X1 Unbundled Release: 1.0 Xref: Topic: Relevant Architectures: sparc.sun4u BugId's fixed with this patch: 4385804 4390270 4391201 4391203 4394181 4396903 4397743 4398420 4400477 4401049 4401102 4402189 4402986 4404651 4405349 4408135 4410739 4413357 4414628 4425430 4458722 4625783 4651343 4686990 Changes incorporated in this version: 4651343 4686990 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: 111092-02 or greater Obsoleted by: Files included with this patch: Update.to.flapjack_lite.4.0.18@OS Problem Description: 4686990 V100 doesn't handle short power outages very well 4651343 V100 requires support for higher speed CPU (from 111952-02) 4625783 RFE: require OBP support for Sun Fire V100 (from 111952-01) 4458722 prom 4.0.7 has broken power button orderly power down functionality 4425430 require M5819 support in the prom 4414628 Data Access Exception error encountered on power on 4413357 flash-update doesn't work with P2 flapjack lite. 4404651 No Utility for upgrading OBP via solaris. 4385804 WARNING: ds1287_attach: Failed to add interrupt: RTC driver 4390270 Davicom ethernet gives access errors. 4391201 OBP firmware reads the speed jumper settings from the wrong address 4391203 OBP firmware command ".speed" broken, commands exits with data access error 4394181 require 12 digit MAC address compatibility in prom 4396903 Davicom driver compatible property is incorrect. 4397743 'set-time' sets the year incorrectly. 4398420 dmfe driver should unmap and free resources on close. 4402189 OBP requires obdiag test for davicom 9102 chip. 4401102 require fix for 4400935 to support Solaris 9 in prom 4401049 OBP should not create energystar-v2 property. 4400477 require pci compatibility property (grover bugid 4397383) 4402986 require correct model property in flashprom node. 4408135 System does not boot to OBP after changing ttyb-mode variable 4405349 reboot test corrupts CORE area of SCC. 4410739 OBP interrupt map does not contain entry for isa power node. 4413357 flash-update doesn't work with P2 flapjack lite. 4404651 No Utility for upgrading OBP via solaris. Patch Installation Instructions: -------------------------------- This is not an OS patch and is not installed with the standard patchadd(1M) command. After unpacking the patch, follow the "Special Install Instructions" below to upgrade the system PROM. This patch is not OS-dependent. The list of releases shown under the "Solaris Release" and "SunOS Release" sections may not be complete. The absence of the running Solaris Release or SunOS Release from the lists above does not preclude the installation of this patch on the hardware. Special Install Instructions: ----------------------------- Bring the system to be upgraded down to single user mode, and log in as root. Run the script provided within this patch, as follows: # chmod +x Update.to.flapjack_lite.4.0.18@OS # ./Update.to.flapjack_lite.4.0.18@OS The following output will be seen: # ./Update.to.flapjack_lite.4.0.18@OS ************************************************** * Running upg.1827 * Generated Fri Mar 14 16:20:31 GMT 2003 ************************************************** WARNING: This Program will write a new PROM image. Are you sure you want to do this? Enter 'C' to Continue installation or 'T' to Terminate C Stripping bundled file: done Decoding and untaring: done Verifying checksums: done Installing flashprom driver file: done WARNING: Updating Flash PROM with new system firmware in progress... It may take a few minutes. ****** DO NOT INTERRUPT OR POWER-DOWN THE SYSTEM ******* Updating Netra X1 PROM 1 Erasing ... Done. 1 Verifying Erase ... Done. 1 Programming ... Done. 1 Verifying Program ... Done. ***** upg.1827 Completed Successfully **************************************************************** * NOTE: updated Firmware takes effect after next reboot or * * Power cycle of the system. * * If there is any configuration support to become effective, * * you have to use -r with your boot command * **************************************************************** # When the upgrade is complete, shut down and then power cycle the system. After the system has been rebooted, the unpacked patch may be removed if desired. After performing the above, the upgrade may be verified using one of the following methods: 1. At OBP, use the '.version' command. The firmware versions displayed should be: ok .version Firmware CORE Release 1.0.18 created 2002/5/23 18:22 Release 4.0 Version 18 created 2002/05/23 18:22 cPOST version 1.0.18 created 2002/5/23 CORE 1.0.18 2002/05/23 18:22 ok 2. When running Unix, use the prtconf(1M) command. The version displayed should be: # prtconf -V OBP 4.0.18 2002/05/23 18:22 # ****************************************************************************** ** WARNING **** WARNING **** WARNING **** WARNING **** WARNING **** WARNING ** ****************************************************************************** * Please read the instructions carefully and completely. Please follow the instructions exactly as stated. * Failure to follow the instructions could result in either a defective system board or an unsuccessful flash PROM update. * This patch cannot be installed on a running system because the installation requires that the system be brought down. Be sure to schedule down time to install this patch. * Any "Required" patches specified above must be installed on the system before performing the PROM upgrade. If the patches are not installed, the upgraded system will not boot. * The upgrade will replace the whole of the current system PROM image with the new image provided in this patch. Do not perform the upgrade if you have added custom dropins to the system PROM. ****************************************************************************** ** WARNING **** WARNING **** WARNING **** WARNING **** WARNING **** WARNING ** ****************************************************************************** README -- Last modified date: Tuesday, August 19, 2003